Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 40, No. 1 (2016)

Dale Rogers

Dale Rogers, dalecmrogers@gmail. com

“In your last issue (Vol. 39, No. 6), Herman Vander Vos wrote about his problems with push rods in his Husqvarna riding mower bending and breaking. My guess is the sticky engine valves were caused by using stale gas.

“A few years ago I poured 5 gal. of old gas into my 1985 Oldsmobile. The gas didn’t smell bad and looked good. I drove about 40 miles the first day. The next morning, when I tried to start it up, a couple push rods bent. I thought it was just coincidental, so I replaced the bent push rods and drove it again. Next time I started up, the rods bent again. So I drained out the gas and put in fresh. No more problems.

“I think the old gas gummed up the valves and when the engine cools down, the valves get really draggy, resulting in bent push rods. The only thing old gas is good for is starting fires or washing off engine parts.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.