“Our air compressor came with a pair of small wheels spaced closely together under the tank, which caused it to tip over sideways on uneven ground.
“To keep that from happening, I installed larger front wheels off an old riding mower. I had to extend the compressor’s axle by slipping a 1-ft. length of pipe over each end. Then at the point where the hole was on the axle to hold the original wheel on, I drilled a hole into each pipe and inserted a pin to hold the pipe on and to provide the inner limit for the new wheel. I then drilled another hole near the end of each pipe and inserted a pin to provide the outer limit for the wheel. Riding on bigger wheels that are spaced farther apart, it’s now almost impossible to tip the compressor over.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.