Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 40, No. 1 (2016)

Mark Yax

Mark Yax, Solon, Ohio

“It took too much time to replace the grinding wheels on my bench grinder with buffing or deburring wheels, especially to remove the guards. Instead, I’ve found that old swimming pool pump motors can make excellent polishers and eliminate the need to replace anything. These motors are usually 3/4 hp and operate at 3,450 rpm’s. Removing the motor’s impeller leaves a 1/2-in. standard shaft with a threaded end, which can be used with a nut and some washers to secure the deburring wheel or buffing wheel.

“I mounted my pump motor on a steel plate that clamps onto my workbench when needed. When you use a swimming pool pump motor this way I’d recommend always wearing safety glasses or a face shield because this setup has no guards. And never use a grinding wheel this way unless you make up some kind of guard that covers about 3/4 of the wheel, like you see on bench grinders. The wheel could explode and send chunks flying in all directions.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.