Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 40, No. 4 (2016)

Donald Jaster

Donald Jaster, Bruce, Wis.

“I needed an adjustable clevis that would let me adjust both brake pedals on my Allis Chalmers B tractor. I don’t have an Allis dealer close by for parts, so I bought an aluminum turnbuckle with an open frame and converted it into a big clevis. I cut the turnbuckle off on the left thread end, and then I cut off the tractor’s left brake link and used a die to make a 5/16 thread. The brake link is slightly bigger than 5/16 so I had to grind it down some to allow the die to work. I paid about $3 for the turnbuckle.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.