Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 40, No. 5 (2016)

Ken Haag

Individual tip 1 of 2 from this reader’s published contribution.
Ken Haag, Unionville, Mich.

“I added power steering to my Deere 1020. To do it, I had to remove a steel ball bearing pressed into the transmission case. It was deep. I used a small chisel to get enough clearance to weld a nut onto it and used a slide hammer to remove it. Worked great.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.