Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 41, No. 2 (2017)

Earl Caron

Earl Caron, Oxford, Mich.

“The clutch linkage on my Kubota 3600 GST tractor was froze up right where it goes through the bell housing. When I pressed the clutch in, the pedal would stick all the way down to the floorboard. I tried all the penetrating oils but nothing would help. The dealer wanted $1,800 to fix it because they would have to remove the loader and break the tractor in half to get to the problem.

“Then I remembered the article in FARM SHOW about making penetrating oil from a 50-50 mix of transmission fluid and acetone. After mixing the two, I applied some and let it soak in. A couple hours later I added more and started working the clutch pedal in and out. I added more as I worked the pedal and, in no time, the pedal was back to normal.

“I was so happy with not having to spend the money on a repair, I renewed my subscription to FARM SHOW for 3 more years!”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.