Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 41, No. 2 (2017)

Doug Clark

Doug Clark, Ilderton, Ontario

“In FARM SHOW’S Vol. 40, No. 1, Gary Holland suggested placing a strong magnet on a drill press in order to gradually magnetize a drill bit so the shavings will stick to it instead of flying around. If you want to instantly magnetize a drill bit or any tool, such as a screwdriver or allen wrench, here’s how to do it.

“Just wrap as much coated wire as you can around the tool, leaving the wire bare at each end. Attach one end to the positive clamp on a 12-volt battery charger and quickly strike the other wire against the negative clamp.

“With just a brief instant of direct current, any insulated coil of wire will set up a magnetic field in the center that will magnetize almost any high grade steel, and the magnetic field will stay with the tool for years.

“If you don’t have access to a battery charger, you can hold one end of the wire to the positive cable on a vehicle’s battery and quickly strike the other end to a grounded part of the vehicle away from the battery.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.