“As the owner of a tree care business I recently made a money-saving repair on my pto-operated Vermeer wood chipper. I had repowered the machine a few years ago with a Kohler 22 hp engine, but after about 150 hrs. a bushing on the pto shaft that drives a set of pulleys wore out and began leaking oil. A local shop wanted almost $1,000 just to replace the bushing and housing.
“Instead, I decided to replace the bushing with a bearing. I bought a new 4-flange, 1 1/4-in. sealed bearing for $75 and slipped it over the pto shaft, then bolted it to the engine mounting plate. The flanges didn’t quite line up with the original holes on the bearing housing so I redrilled a couple of them. I also replaced a seal. It works perfect now and doesn’t leak any oil at all.
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.