Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 41, No. 3 (2017)

Menno L. Chupp

Menno L. Chupp, Arthur, Ill.

“I bought a used Peerless roller mill mixer 3 years ago with an unloading auger that didn’t work due to a stripped gearbox. I couldn’t find another mixer auger to replace it, so instead I used an old 12-ft. long gravity wagon auger that I bought at an auction for $50.

“The mixer came with a short auger at the bottom that delivered feed through a slide gate and then into another auger mounted outside. I removed both augers and reinstalled just the gravity wagon auger. It came with a metal chute, hydraulic motor and hoses, shut-off valve, and a hand-operated winch to raise or lower the auger. The gravity wagon mounting bracket didn’t match up with the mixer auger’s original bolt holes, so I installed a pair of homemade metal brackets on either side of the auger to hold it in place.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.