Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 41, No. 3 (2017)

David Simpler

David Simpler, Elkton, Md. ([email protected]; ph 443 350-1199)

“While rebuilding my Brillion Culti-packer, I discovered that an end bearing and its housing were completely frozen. I didn’t want to beat on them with a hammer because they’re made of cast iron, but I knew that just spraying solvent on them wouldn’t help, either. So I decided to soak the axle for a few days. I cut off about 1/4 of an old wheelbarrow tire and clamped it onto the axle, then filled it with diesel fuel to soak the bearing. Worked great.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.