Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 41, No. 3 (2017)

Phil Whitmoyer

Phil Whitmoyer, Leesport, Penn.
Phil Whitmoyer
Photo: FARM SHOW · Vol. 41, No. 3 (2017) · p. 33

“I didn’t like having to guess which size bolt thread I was dealing with when making repairs. So I took a length of 1/4-in. thick scrap steel plate and tapped 2 rows of every size of American thread, ranging from 3/8-24 down to 4-40. I stamped the thread size onto the plate next to each hole. I also inserted a row of bolts of different sizes through the plate from the back side. Now I can quickly check any bolt or nut to see which size I need. If nothing fits I know it’s metric. The plate hangs above my workbench so I use it a lot.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.