A homemade grease gun extension makes it easy for Marlin Galde to lubricate the deck pulleys on his Deere 325 all-wheel-steer riding mower equipped with a 48-in. deck.
“The zerks on this deck’s 3 pulleys are difficult to get at, and using a flexible hose on my grease gun didn’t work very well. I made a 15-in. long straight pipe extension that works much better,” says Galde.
“I also use the extension on my New Holland Boomer compact tractor equipped with a 72-in. belly-mount deck.” He removed the grease gun’s fixed tube and replaced it with a 15-in. length of plumbing pipe that’s threaded on both ends. He threaded a T fitting onto the end of the pipe and then threaded a 2-in. long grease fitting onto the bottom of the T. He also threaded another grease fitting onto the far end of the T. He caps it off when using the other fitting.
“I use the pipe extension mainly for vertical access to zerks on mower belt pulleys,” explains Galde.
“I just reach in and push down to lock the grease fitting onto the zerk and then start pumping. I use another grease gun on zerks that are easier to access.” Galde says he’s considering manufacturing the grease gun attachment. Contact: FARM SHOW Followup, Marlin Galde, 18075 78th St. S.E., Wahpeton, N. Dak. 58075 (ph 701 899-1676; [email protected]).
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.