Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 42, No. 1 (2018)

“Sabre Saw” Paint Can Shaker

Featured source: James Nicholson

James Nicholson made a wall-mounted, automatic aerosol paint can “shaker” that makes use of an old sabre saw. The paint can sets inside a piece of pvc tubing, which attaches to the saw in place of the blade.

“I came up with the idea because I was tired of shaking spray cans,” says Nicholson. He cut a 10-in. length of 3-in. dia. pvc tubing in half lengthwise and screwed round pieces of 1/2-in. thick plywood onto both ends of the tube to close it off. He installed a small spring in one of the pieces to hold the can in place. He then riveted the tube onto a length of 1/2-in. key stock that serves as a support. A length of light-duty channel iron is bolted to the base of the saw and serves as a support and guide for the key stock and pvc tube.

“It works great and really comes in handy since I do a lot of spray painting and varnishing in my work shop,” says Nicholson.

“I bought the 3-speed sabre saw at a yard sale for $7. I run the saw on low speed so it’s not too aggressive. Because the saw is wall-mounted, it stays nice and stable and doesn’t jump around. I cut a hole into each side of the tube so that when I’m done I can stick my fingers through and pop the can out.” Contact: FARM SHOW Followup, James Nicholson, 12412 S.R. 45, Lisbon, Ohio 44432 ([email protected]).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.