Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 42, No. 5 (2018)

Roger Gutschmidt

Roger Gutschmidt, Gackle, N. Dak.

“I recently refurbished the 3 Gas Boy pumps I use on my fuel tanks. My pumps are old but still going strong after pumping close to 100,000 gal. of diesel fuel and gasoline on my farm. All parts are available online for these pumps, including the brass vanes and the little number wheels that register the gallons dispensed. The impellers and vanes are easy to get at with only 2 bolts holding the cover. I replaced the clear plastic over the dial with a piece I cut out of a clear liter bottle of soda.

“Recently, I found an old Gas Boy pump at the junk yard. It was locked up. I took off the cover on the impeller and found that one of the brass vanes on the impeller had broken off and got wedged in the housing. I turned the impeller backward with a screwdriver and the broken piece fell out. After that, the pump worked perfectly.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.