Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 43, No. 4 (2019)

“Sawzall” Paint Can Shaker

Featured source: Gene Boehler

Gene Boehler made an aerosol paint can “shaker” that makes use of an old cordless Ridgid sawzall, attaching a homemade shaker to the sawzall in place of the blade. A hose clamp attaches the can to the shaker. The paint can sets inside a 4 1/2-in. length of 3-in. dia. exhaust pipe that Boehler cut in half and welded to a 6-in. long, 1 1/2-in. dia. square tube. A short length of small bar stock is welded on inside the tube and also welded to the sawzall’s blade-holding shank.

“It works fast and really shakes up the paint - my aerosol paint cans have never worked better,” says Boehler.

“I came up with the idea because I wanted to use Rust-Oleum epoxy appliance paint cans to re-finish my old kitchen cabinets, but couldn’t get my spray cans to work right without clogging or sputtering. I tried a couple different ways to shake the cans, but they were slow and didn’t work all that well.

“Before welding the exhaust pipe to the square tube, I made allowance for the hose clamp that’s used to attach the can to the shaker. I glued on some pieces of soft, thin rubber to help hold the can in place as it’s being shaken.” To keep the entire unit stable he welded a small metal plate to the foot of the sawzall. To keep it from shaking his work bench, he bolted it to a 10-in. I-beam that supports the overhead hoist in his shop and is set in 3-ft. deep concrete.

“All cans painted beautifully, with no clogs or sputters,” says Boehler. Contact: FARM SHOW Followup, Gene Boehler, 27299 W. Frontage Rd., Farmersville, Ill. 62533 (ph 217 227-3220).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.