Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 43, No. 4 (2019)

John Stuber

John Stuber, DeSoto, Mo.
John Stuber
Photo: FARM SHOW · Vol. 43, No. 4 (2019) · p. 33

“I turned a rolling walker into a handy, portable workbench. It’s sturdy, lightweight, easy to maneuver, and quickly folds up for storage. I used a piece of scrap aluminum to make the 16 by 24-in. top and screwed wooden pieces onto 3 sides to contain the tools. A piano hinge off an old aluminum cabinet is screwed onto the back side, which allows the walker to fold.

“A pair of short 1 by 6 boards connect the piano hinge to the walker’s tubular frame. The boards attach to the piano hinge with hex head screws and to the walker with carriage bolts. A metal strip is screwed onto the piano hinge for extra strength.

“To fold the workbench I raise the top and then push down on factory buttons at the walker’s front corners, which releases the legs so I can fold them in.

“It’s tremendously handy and takes up much less room than my roll-around cart. All my tools are always right there where I need them and at a convenient working height so I don’t have to bend over. I use it in my wood shop, garage, and even my house.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.