Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 43, No. 5 (2019)

Bill Knutson

Bill Knutson, Centerville, S. Dak.

“ I m a d e t h i s simple tool that makes releasing p r e s s u r i z e d hydraulic couplers as easy as turning a T- h a n d l e . I removed the ball and spring from a coupler and screwed on a 4-in. long nipple, then welded a 1/2-in. nut to the other end of the nipple. I also drilled a 3/16-in. dia. hole in the coupler and welded a 1/2-in. threaded rod to a T-handle. Screwing the rod all the way into the nut pushes on the ball at the end of the hose and releases the pressure. Works great.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.