“Here’s a simple idea if you ever need a gasket to stop a minor leak that’s not caused by pressure on an odd-shaped housing. This will work if you can open the cover a fraction of an inch but don’t want to take the whole assembly apart. For example, I used this idea on a Case rear tractor axle and on a differential flange on a 1959 Ford.
“Coat a long thin piece of string with flexible permatex gasket sealer, then hang it up to dry. Once it’s dry, loosely coil it into a ziploc bag and keep it until needed.
“To use, separate the assembly just far enough to tuck the coated string into the gap using a thin flat screwdriver. Be careful not to damage the existing gasket. Overlap the ends on the string on either side of the leak. Retighten the assembly and you should be good to go.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.