Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 44, No. 3 (2020)

Carman Fedele

Carman Fedele, Tidioute, Penn. (ph 814 730-9377)

Carman has a simple solution for cutting perfect circles in metal. His patented torch guide makes it easy. Just clamp down a shoulder plate, insert the torch, and rotate.

“My prototype can cut out any size circle up to 4 in. in diameter. You can use it to cut out any size washer needed or cut a perfect hole in a piece of metal.” At 83 years of age, Fedele isn’t planning to manufacture the device. He hopes to license or sell the rights as he did with an earlier patented device (Vol. 39, No. 1). His torch guide is a ring within a ring. The outside ring is attached to a 1/8-in. thick steel plate for easy clamping in place. The inside ring has an adjustable inner arm with a cup for the torch head and 4 handle arms that extend outward.

“Adjust the cup arm to the desired diameter, insert the torch and rotate the ring with the handles,” says Fedele. While his prototype has a maximum cut of 4 in., Fedele notes it could easily be scaled up. The larger the ring diameter, the more versatility it offers.

“You could have one that cut out a 24-in. circle and yet still use it to cut out a 2-in. circle just by adjusting the cup arm,” notes Fedele.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.