Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 44, No. 3 (2020)

Ned Ransom

Ned Ransom, Henry, Ill.

“When working with wheel weights, I’ve got a trick that makes it much easier to mount them to a tractor wheel when working by myself. I’ve got two 3/4-in. dia. smooth steel rods about 18 in. long. I put these in the hub holes first and then put the weights on the rods and push them up against the wheel. I put in a bolt and tighten it, then remove one rod and insert another bolt, and so on. This works with 1-piece weights or 2-piece ‘half’ weights.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.