Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 44, No. 4 (2020)

David Simpler

Individual tip 2 of 2 from this reader’s published contribution.
David Simpler, Elkton, Md.

“I bought a tire changer specially designed for riding mower and ATV tires, but it didn’t work very well so I came up with a way to use a masonry block hammer along with a 3-lb. hammer. It works great. I start with a 6-in. long, 5/8-in. dia. bolt, weld a piece of 3 by 3 by 1/4-in. thick plate onto the head, and then clamp the plate in my bench vise. I mount the tire on the bolt and tighten the nut (not shown), then use the 3-lb. hammer to hit the head end of the masonry hammer in order to break the bead.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.