Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 44, No. 4 (2020)

“Handee Clamp” Holds Small Parts

Featured source: Handee Clamp, LLC
“Handee Clamp” Holds Small Parts
Photo: FARM SHOW · Vol. 44, No. 4 (2020) · p. 35

This new tool is designed to attach nuts, bolts or hose clamps in hard-to-reach places where your hands or other bulky tools can’t reach. The powder-coated Handee Clamp measures 10 in. long by 5/8 in. wide and comes with a sliding “jaw” on one end and an adjustable nut on the other end. The jaw opens to a little over 1 1/8 in. You slide the jaw out and place the nut, bolt or other part on it, then tighten the nut to lock the jaw in place. The jaw can handle bolts and nuts from 1/8 to 3/4 in. According to the company, the Handee Clamp works better than a needle nose pliers because there are no handles in the way as you reach into the tight space. Also, pliers require constant pressure which you don’t need to worry about with the Handee Clamp. Sells for $21.50 plus S&H. A zinc-coated model is also available and sells for $18.50 plus S&H. Contact: FARM SHOW Followup, Handee Clamp, LLC, 2826 Smith Ave., Marshalltown, Iowa 50158 (ph 641 485-3868; [email protected]; www.handeeclamp.com).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.