Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 45, No. 2 (2021)

Leete Etheridge

Leete Etheridge, Columbus, Texas

“I had a big cut on the face of a tractor tire, located between the treads. Local tire repair places said there was nothing to be done. So, I figured I had nothing to lose. I squirted carb cleaner into the gouge to clean it out and then put a glob of FiberFix Extreme Gel by J-B Weld into it. Then I wrapped a come-along around the tire, placing a 2 by 6-in. brass pin across the gouge to compress the edges of the cut together as I tightened it up. I had to keep pounding on the pin because it rolled while I tightened. I let that sit for 24 hrs. Since I made the repair, I’ve used the tractor to haul 30 cords of wood and to do other work. I looked at the cut the other day and you can hardly see where it was. Problem solved.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.