Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 45, No. 2 (2021)

Michael Heron

Michael Heron, Lloydminster, Sask.

“Here’s what I do when I need to replace a drive belt and want to measure it without cutting it. I tape one end of a fabric measuring tape onto the belt, and then rotate the belt pulley until the tape winds back around to its starting point. If you want to try this idea but don’t have a fabric measuring tape, you can use an old, longer belt that’s already cut. Rotate the belt around the pulleys and mark it, then remove the belt and measure it. If none of these methods work, just make equidistant marks at convenient lengths on the belt and tally up the total length.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.