Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 45, No. 4 (2021)

Dan Tucker

Dan Tucker, Wasilla, Alaska

“I saw a tool in Vol. 43, No. 5 for releasing pressurized hydraulic couplers. I quit fighting with couplers some time ago when I realized that the pressure comes from the source – and I had control of that source. So if a coupler is pressurized, I shut off the tractor or skid steer, then turn the ignition back on and, as necessary, get the automatic locks to unlock by enabling the systems. Then I move the lever for that coupler back and forth, as if I were using that circuit. Then the coupler should not be pressurized any more.

“Sometimes, if I bump the hydraulic levers or switches when fittings are uncoupled, the fitting will be pressurized. Then I turn on the ignition, ‘enable’ the hydraulics and move the levers or activate the switches, and the pressure will bleed off.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.