“I have a simple, economical repair for a reader in a recent issue whose Ford 600 tractor had leaky hydraulic lines where they run through the transmission housing.
“You need to split the tractor and remove the transmission, and then measure the diameter of the tube. Then go to an auto parts store and buy a brake line tube that will snuggly slide through the transmission from one end to the other. The tube we bought was flared at one end, so we cut the tube about 1/4 in. longer so that we could flare the other end as well. We put silicone on the ends and replaced the rubber doughnut gaskets at each end.
“Then we put the tractor back together. However, we didn’t try to start the tractor for 24 hrs. to make sure the silicone had dried. Worked like a charm.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.