Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 45, No. 4 (2021)

Ramp Winch Saved His Back

Featured source: Chester Kimber

“After hurting my back lifting the loading ramps on our flatbed trailer, I decided I had to do something to make the job easier,” says Chester Kimber, Amistad, N. Mexico.

“So I attached a hand-cranked winch to a 5-ft. long pipe and put a pulley at the top. Then I ran the winch cable up to the pulley and down to the end of the ramp. Makes it easy to lift the ramp off the trailer or ground.

“I can mount the apparatus on either side of the trailer to lift each ramp. The pipe just slides into a slot on each side of the trailer. There’s a hook to attach to on the side of each ramp.”

Contact: FARM SHOW Followup, Chester Kimber, Amistad, N.M. 88410 (ph 575 633-2016).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.