Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 46, No. 5 (2022)

David Simpler

David Simpler, Elkton, Md.

“I bought a used 6-ft. Bush Hog for some woods work and needed it in good working condition but the blades were like an old sway-back butcher knife. I bought new ones and went to take the nuts off. The impact gun just spun the nuts, so I had someone hold a 24-in. pipe wrench on the head of the bolt. It still spun and flattened the teeth on my pipe wrench. Now mad, I got my torch out, burned them off the best I could, and got the blades off but needed to burn more up closer to drive the bolt through the top of the mount. Finally, a light switch came on and my brain engaged. I should have welded the bolt head to the blade, then ground it off once out, or used a grinder to cut two flats on the head of the bolt for a wrench.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.