Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 46, No. 6 (2022)

Jim Heaslip

Jim Heaslip, Hagersville, Ont.
Jim Heaslip
Photo: FARM SHOW · Vol. 46, No. 6 (2022) · p. 33

“I made a tool to make S-hooks and J-hooks. It consists of a piece of 1/2-in. hammermill screen flattened out with a piece of 2-in. angle iron welded on the bottom to hold it in a vice. It works well for bending 3/16 and 1/4-in. steel rod but 5/16 and 3/8-in. rod requires some heat to make the bends. I use a piece of pipe to help bend the rods around various size discs and tubes that are bolted to the hammermill screen. Comes in handy more times than you would think.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.