Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 46, No. 6 (2022)

Mike Frantz

Mike Frantz, Seymour, Mo.

“One money-saving tip I came up with is taking apart 2-piece idler pulleys on my riding lawn mower and replacing or repacking the bearing. These pulleys are meant to be replaced when the bearings go bad but I just drill out the rivets and spot welds so I can take out the bearing. If the sealed bearing is not rough but just dry, you can use a razor blade knife to gently work out the seal on one side and pack grease in before bolting the pulley back together. When the bearing wears out again, it’s a simple matter of unbolting the pulley. Saves a lot of money over buying new pulleys.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.