Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 46, No. 6 (2022)

Dale Fisher

Dale Fisher, Jackson, Mich.

“When you install a turnbuckle that’s going to be there a while, you need to add a jam nut to keep it from working its way loose from where you set it. Then you still might need to adjust the jam nut later if it starts working loose.

“I found that if I weld a small weight to one side of the adjusting yoke, the turnbuckle will hold. The weighted side will swing to the bottom and stay there. I’ve used this idea for several applications but using it on my 3-pt. hitch arms is the most satisfying.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.