Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 47, No. 2 (2023)

Jim Morey

Individual tip 2 of 2 from this reader’s published contribution.
Jim Morey

“On another note, I was having trouble with the chain seizing at the tip of the bar. The bar has a sealed bearing at the top but over time crud works into and binds the sprocket. To solve the issue, I drilled a 1/8-in. hole on each side of the bar in order to grease the sprocket. Be careful not to drill all the way through so as not to damage the sprocket. Then occasionally apply grease to the sprocket. It saves having to buy a new bar prematurely.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.