
“I use a cam-lock load binder to tension the drive belt on my rotary mower.
“Typically, people put a new belt on a mower and tension it. Then they forget it and leave it under tension all summer, and it stretches.
“Mower decks vary, but all have a spring to tension the belt. Some have an eyebolt or hook welded on the deck, and you pull the spring over it.
“Releasing the tension on a belt can be difficult and even dangerous, depending on the machine. A small cam lock load binder makes it easy to tension a belt and release the tension.
“On one mower deck, I just hooked the load binder to the edge of the deck. On another, I bolted an L-shaped piece of steel to the deck. An eyebolt on one end of the load binder is secured through a hole in the short leg of the L to anchor the load binder in place.
“When I want tension on the belt, I hook the other end into the tensioning spring and pull back the lever. The cam-lock load binder releases tension slow and easy. It makes it less likely I’ll leave the tension on when not using the mower.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.