Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Issues / Vol. 48, No. 2 (2024)

Vol. 48, No. 2 (2024)

Money-Saving Repairs & Maintenance Shortcuts · Printed section pp. 32–35

29 selected entries · Complete text of selected entries

This issue’s section includes reader tips and feature-length shop stories. Held items and editorial notices are not reproduced.

Archive text: prices, coupons, availability and contact details reflect the original publication, not current offers. Reader methods are not universal instructions; follow manufacturer guidance and proper safety practices.

Reader shop tips

From the archive · Full text
Reader shop tip

Dale Fisher

Dale Fisher, Jackson, Mich.

“The portable propane heater that I use in my shop was difficult to move to different locations, so I put it under one of my worktables that has casters on it. Now I have portable heat and the work surface is free to use. The only thing I had to do was to add a shelf under the table to hold the burner and tank.”

From the archive · Full text
Reader shop tip

David Simpler

David Simpler, Elkton, Md.

“I use a cam-lock load binder to tension the drive belt on my rotary mower.

“Typically, people put a new belt on a mower and tension it. Then they forget it and leave it under tension all summer, and it stretches.

“Mower decks vary, but all have a spring to tension the belt. Some have an eyebolt or hook welded on the deck, and you pull the spring over it.

“Releasing the tension on a belt can be difficult and even dangerous, depending on the machine. A small cam lock load binder makes it easy to tension a belt and release the tension.

“On one mower deck, I just hooked the load binder to the edge of the deck. On another, I bolted an L-shaped piece of steel to the deck. An eyebolt on one end of the load binder is secured through a hole in the short leg of the L to anchor the load binder in place.

“When I want tension on the belt, I hook the other end into the tensioning spring and pull back the lever. The cam-lock load binder releases tension slow and easy. It makes it less likely I’ll leave the tension on when not using the mower.”

From the archive · Full text
Reader shop tip

Joe Kansak

Joe Kansak, Ocean View, Del.

“I have a 10,000-sq. ft. shop, and it seemed like we were always leaving stuff on. I would come in and discover a heater, air compressor, or lights hadn’t been shut off. Left on for a day or two, the electricity used adds up.

“I solved the problem with a shop monitoring plate. I drilled six small holes in a blank outlet plate and inserted LED lights in them. I ran wires from one of the legs of each light to the neutral bar on the shop’s electrical panel.

“I ran a 16-gauge insulated wire from the other leg of each LED to the non-energized side of the switches I wanted to monitor and labeled the LEDs for air, heater, exhaust, attic light, back lights, and outside lights.

“If an LED light is on, it reminds me to shut off that switch before I leave the shop. It worked so well that I’ve added another set of LEDs on a second plate for additional switches I want to monitor.”

From the archive · Full text
Reader shop tip 1 of 2

Ronald Hurst

Individual tip 1 of 2 from this reader’s published contribution.
Ronald Hurst, Knoxville, Tenn.

“When working on sheet metal reassembly, it’s very easy to accidentally strip screw holes. To avoid this, I always restart a screw in a previously threaded hole by turning the screw slowly counter-clockwise until I feel it drop into the hole’s old thread. Then I turn the screw clockwise to snug it down. This avoids cutting a new thread and stripping the hole. If more than one fastener is needed to secure a part, leave all the fasteners loose before tightening them. This saves time and aggravation by allowing minor adjustments when the holes don’t align just right.

From the archive · Full text
Reader shop tip 2 of 2

Ronald Hurst

Individual tip 2 of 2 from this reader’s published contribution.
Ronald Hurst, Knoxville, Tenn.

“I frequently work on small electric motors 1/2 hp. and below, especially small fan motors. I don’t like using 3-in-1 oil as a lubricant because it dries up fairly quickly, leaving a gummy varnish on the shaft and bearing. One day at Home Depot, I was talking to another customer who happened to work for an electric motor repair service. I asked if they did any rewinding of motors around 1/2 hp. in size. He said they wouldn’t work on anything under 3/4 hp. He also said that for all sleeve bearing lubrication, they use Mobile Velocite, a high-quality synthetic oil that’s engineered for Bridgeport spindle bearings. Looking online, I discovered that the smallest quantity of this oil you can buy from Mobil is 1 gal., but there are vendors on eBay who repackage it in 1 qt. bottles. I bought 2 qts. and a quality oil can (keeps its prime) for applying the oil. So far, nothing I’ve used this oil on (both ball and sleeve bearings) has dried up, even motors that have run constantly for a year or more. Great stuff!”

From the archive · Full text
Reader shop tip

John Humeniuk

John Humeniuk, Baudette, Minn.

“I got tired of having small and light parts fly around inside my sandblaster. Now, I put them on these extra-large safety pins.

“You can find 5-in. long, stainless-steel safety pins on Amazon for as little as $7 for a pack of five.

“They’re great for small nuts and washers, as well as clamps like I had in this photo. I don’t have to worry about them getting lost in the blast medium and only partially cleaned.”

From the archive · Full text
Reader shop tip

Tom Mattiuz

Tom Mattiuz, Saint Marys, Penn.

“I bought a Deere X390 lawn tractor with a mower and 44-in. snowblower. The blower belt is a bear to install. The instructions state that once the blower is mounted, you raise it to the uppermost level to work the belt on. Who are they trying to fool? There’s no way to release the belt tension. Each time I installed it, I smashed one of my fingers. The old-style snow THROWER had a lever to release the belt tension for easy installation. Not the newer model BLOWERS. To install it this year, I looped a rope around the pulley arm, ran a piece of rebar through the loops in the rope, and pulled it to release the tension. I was by myself, so I couldn’t hold the bar and put the belt on at the same time. So, I had to jury rig a solution (see picture). I used a small pry bar against the frame and held the rebar tight with it. Deere needs to have an older person that has arthritis install their attachment and make sure it’s an easy install.”

From the archive · Full text
Reader shop tip

Charley Chessher

Charley Chessher, Meriden, Kan.

“I bought new struts for my car without the springs. I needed a way to compress them to get them back on, so I took my log splitter and it worked great to compress them with a small cable and clamps.”

From the archive · Full text
Reader shop tip

Larry McCollum

Larry McCollum, Hulett, Wyo.

“I was having trouble with cows tipping over plastic lick tubs. I took an old baler tire and marked out the size of the lick tub then cut it out with a chainsaw. I slid the lick tub into the hole in the tire, now the cows can’t tip it over.”

From the archive · Full text
Reader shop tip

James Neppl

James Neppl, Preston, Minn.

“When my IH 1460 combine went down between a field and home, I used two hose clamps and a piece of inner tube on the hydraulic suction line to get it back home.”

From the archive · Full text
Reader shop tip

Darrell Cooper

Darrell Cooper, Chillicothe, Mo.

“It can be dangerous and dirty climbing under field cultivators and discs to grease all the couplings. If you use flex grease hose and angled adapters with a holder at the top of metal by welding a straight coupler on the end of the hose and put a grease zerk you can then grease from the top side.”

From the archive · Full text
Reader shop tip

Kenneth Todd

Kenneth Todd, Red Deer County, Alberta

“If you have a hammer or axe head that is slightly loose and needs to be tightened up, a lot of people will put it into a jug or bucket of water and leave it sit for a few days until the wood swells and the head is tight again. The problem is that when the wood dries out the head will become loose again. The trick is to soak the hammer or axe in anti-freeze and not water so it won’t dry out.”

From the archive · Full text
Reader shop tip

Nigel Thornborrow

Nigel Thornborrow, Yorkshire, U.K.

Nigel mounted a bicycle water bottle holder to the cup holder in his tractor cab so he could have both hot and cold beverages handy at the same time. We found Nigel’s idea in Profi magazine U.K. (www.profi .co.uk).

Shop feature stories

From the archive · Full text
Feature story

Tuning Packages Bump Vehicle Performance

Featured source: Tyler Czipar and Katelyn Czipar

At an age when most kids were playing video games, Tyler Czipar was rebuilding lawn mowers and garden tractors with blown engines that his dad would buy from the local hardware store and repair shop.

“Growing up and working on small engines, I always knew I wanted to make a career out of performance tuning for a wide range of engines and equipment,” Czipar says. After small engine repairs, he began building garden tractor-pulling engines, then eventually moved into performance tuning. He learned first-hand skills working alongside his dad, who has an engine-building background. After high school, he earned an associate degree in electrical technology, and since then, he’s mastered his skills by self-study and applying what he’s learned. Since 2011, Czipar and his wife, Katelyn, have built Czipar Performance & Tuning into a nationally recognized performance tuning business. They’ve grown from tuning vehicles for local customers to bumping horsepower and performance for customers across the U.S., Canada, and other parts of the world.

“We made a name for ourselves with excellent work for local guys who spread the word, and it’s really taken off from there,” Czipar says.

“Most of our work is for people who just want better performance, whether it’s from a truck, car, or even farm equipment.” Their reputation for exceptional work has even brought them prominent customers such as podcaster Joe Rogan, prestige car builder Chip Foose, and Ryan Martin of Street Outlaws.

Czipar says pickups and cars are their main focus, but they’ll also tune tractor and combine engines for improved fuel economy and more horsepower. Their tuning packages include cam kits, Holley tuning, and installing performance parts such as intakes, headers, and manifolds. Fuel systems can be upgraded, and for extremely high performance, they can specify and install several brands of superchargers.

Tyler’s wife and father, Steve, are integral to the business. Says Katelyn, “I’m in the shop every day, either ordering parts or handling billing. Sometimes Tyler calls out, ‘Hey, I need a smaller hand to reach in here and put this bolt in.’ We work together to make this business successful.”

Czipars also provides a remote tuning package for vehicles that aren’t in their shop. This service includes analysis, equipment recommendations, and step-by-step installation instructions.

Tyler says their tuning improves power, throttle response, and gas mileage along with smoother shifting. For example, modifications such as a GPI HL3, Johnson lifters, a Katech oil pump and timing chain, GPI hardened push rods, a new head, manifold, ported throttle body, and converter produce outstanding power and performance in a 2017 Silverado pickup with a 6.2 V-8. They tune other brands of trucks and cars such as Camaro, Mustang, Corvette, and Dodge Chargers.

Katelyn says the best way to start a project is to look at their website and Facebook page, then contact their office for ideas, pricing, and a schedule.

Contact: FARM SHOW Followup, Czipar Performance & Tuning, 8610 Route 52 S, Dubuque, Iowa 52003 (ph 563-599-8492; [email protected], www.cziparperformance.com).

From the archive · Full text
Feature story

Triple Flex Ratchets Reach Tight Spaces

Featured source: Dan Considine, Rathdrum, Idaho

Dan Considine of Rathdrum, Idaho, has created numerous inventions, including flexible ratchets and wrenches designed specifically for tricky spaces. The Triple Flex Crow’s Foot Ratchet and Triple Flex Ratchet Wrench will reach and flex into the most inconvenient workspaces.

“This wrench will do things no other wrench will do and access the unreachable,” Considine says.

“They can reach straight down or in blind areas and still turn bolts or nuts. You can turn bolts and nuts where even sockets won’t reach. No traditional wrench can do that.” To date, his inventions have won four separate awards.

The idea came when he was talking to a friend who is ASC-certified and owns an auto repair shop.

“He’s tried and loved the other tools I let him test, so he requested a custom design to reach the unreachable. I designed him a prototype, and he loved it.”

Considine is a retired Air Force Master Sergeant and former fighter aircraft crew chief.

“I love the USA,” he says.

“Finding a company that hasn’t moved manufacturing overseas is the absolute dream! Even if it’s only a small U.S. company.”

Currently, all Northwind Tools are custom-made, so pricing can vary. You can reach out to Considine to make a purchase.

Contact: FARM SHOW Followup, Daniel Considine, Ret. M.Sgt., 25043 N. Lantern Hill Rd., Rathdrum, Idaho 83858 (ph 208-215-5472; [email protected]; www.northwindtools.com).

From the archive · Full text
Feature story

Biosynthetic Works Better Than Standard Hydraulic Fluid

Featured source: Ben Garmier

Bio-Ultimax 1000 is a biosynthetic oil that lasts longer, performs better, and handles cold weather better than standard hydraulic fluids. The biodegradable product from Renewable Lubricants works well in high and low-pressure hydraulic systems. It directly replaces mineral oil-based hydraulic fluids.

“Based on oil analysis, we find that, if you would normally change the hydraulic fluid at 1,000 hrs., we can get 1,200 hrs. with Bio-Ultimax 1000,” says Ben Garmier, Renewable Lubricants.

“That extra 20 percent frees up maintenance time and labor and keeps equipment in the field. There’s less wear on equipment, and you get full use out of the fluid.”

As a seventh-generation farmer, Garmier understands the value of using Bio-Ultimax 1000 in farm equipment. He appreciates that it’s safer for both equipment and the environment. Its 450 F flashpoint is 200 F higher than mineral oil-based hydraulic fluids. At the lower flashpoint, if a hydraulic line breaks and sprays onto a hot engine, it can result in a fire. Likewise, if a line breaks and flows on the ground, Bio-Ultimax 1000 will naturally degrade.

Research showed the vegetable-based oil was cost-competitive, but didn’t perform as well as pure synthetics. In many cases, a blend of the two provided options.

The products range from straight vegetable oil to pure synthetics with blends in between.

“We start with Bio-Fleet hydraulic fluid, which performs as well as most conventional hydraulic fluids found at Tractor Supply,” says Garmier.

“Bio-Ultimax 1000 is a step up, closer to synthetic performance.”

Bio-Ultimax 1000 is available from various retailers. On the Renewable Lubricants website, a 1-gal. jug is priced at $43.37, and a 5-gal. pail is priced at $212.27.

Contact: FARM SHOW Followup, Renewable Lubricants, P.O. Box 474, Hartville, Ohio 44632 (ph 330-877-9982; [email protected]; www.renewablelube.com).

From the archive · Full text
Feature story

Oil Kaddee Makes Service Easy

Featured source: Trevor Gruber

The E-Zee Oil Kaddee aims to remove the dread of oil changes with a system that makes it clean and easy to drain and pump fluid from heavy-duty trucks and equipment.

“My father, Mark Gruber, created the E-Z Oil Kaddee in the early 1990’s,” says company spokesman Trevor Gruber. A farmer in Michigan, he owned a small fleet of trucks and was looking for something to solve the dirty mess of oil changes. Gruber worked through many prototypes and testing processes before inventing the slide-out design of the current Kaddee.

“The Kaddee is used for easy and clean oil changes but can also be used as a transfer pump for emptying fuel tanks, hydraulic oil tanks, or whatever else,” says Gruber.

“It’s designed for anyone who changes oil in the agriculture, timber, or transport industries. To date, we’ve sold over 5,000 across the nation.”

The team recently redesigned the Oil Kaddee. Says Gruber, “We went from an all-steel pan to a heavy-duty plastic made from recycled plastics. The frame was also all steel and changed to aluminum. The new Kaddee is much lighter to move around but just as heavy-duty.”

It’s easy to roll the Kaddee under trucks or other equipment for easy draining. It can be used with everything from engine oil to hydraulic fluid, anti-freeze, and more, and it holds 20 gal. at a time for disposal or reuse by transporting the used oil to bulk storage. In this way, a previously tricky task becomes a one-person operation. You simply drain oil into the pan and pump it into a storage tank. The Kaddee can also be used as a fluid transfer pump.

The Kaddee runs off a 115-volt 1/2-hp. motor and includes a 20-in. mesh stainless filter and an 8-ft. discharge hose with all quick tach fittings. The overall Kaddee weighs 85 lbs. and measures 11 in. by 24 in. by 48 in.

The E-Zee Oil Kaddee retails for $2,350 on the company website, with about $85 for shipping throughout the U.S.

“We make each E-Z Oil Kaddee in the thumb of Michigan, and most of the product is sourced locally,” says Gruber.

“We have local farmers who still use theirs from 25+ years ago all around us.”

Contact: FARM SHOW Followup, E-Zee Oil Kaddee, 1359 S. Quanicassee Rd., Reese, Mich. 48757 (ph 888-393-3645; [email protected]; www.ezeeoilchange.com).

From the archive · Full text
Feature story

Oil Filter Wrench Gets In Tight Spaces

Featured source: Michael Gutierrez

The JM3 oil filter wrench is a revolutionary design that offers the most comfortable wrench servicing possible for removing oil filters.

The idea was conceived when founder Michael Gutierrez’s brother, “Joe Max,” worked on a 1962 Impala. Joe couldn’t remove the oil filter due to its location despite attempting to do so with multiple tools. He eventually had to stab at it with a screwdriver, which ripped the shell off the filter and required chiseling everything away to combat the damage from rust welding.

“I heard the story, and I thought to myself, there has to be a better tool to do this,” says Gutierrez.

Michael tried to convince Joe that the two of them could develop a better tool for the job. Unfortunately, Joe passed away in 2010. However, Gutierrez continued with Joe’s vision. He always credits his brother for this idea.

“About 3 1/2 years later, Joe came to him in a dream and showed him what the wrench needed to look like. Gutierrez believed the dream was a vision, so he bought a CNC machine to replicate it, and the rest is history.

The JM3 filter tool (appropriately named for his brother’s initials) was officially approved for patenting around the anniversary of his brother’s passing.

The tool has a compact design that’s easy to handle and store. Sturdy 16-gauge steel ensures it’ll last through years of use. Sizing options range from S (2.48 in.) to XL (3.54 in.). Refer to the company website for a complete size chart.

A Gen-1 five-piece standard wrench set sells for $99.99. It includes wrenches suitable for Wix, Micro-Guard, STP, MoPar, and NAPA filters. Single wrenches are $29.99, and a set of three is $74.99. Shipping is free (continental U.S.) for all tools.

“It’s the safest tool you’ll ever use,” says Gutierrez.

“You’ll never bust your knuckles again.”

Contact: FARM SHOW Followup, Michael Gutierrez ([email protected]; www.jm3oilfilterwrench.com).

From the archive · Full text
Feature story

Portable Power Box Provides Electricity

Featured source: GMS Power Distro

GMS Distribution manufactures portable power distribution boxes and electric cords specifically designed for contractor use. The boxes, created by an electrician, are compact and lightweight for easy portability.

The GMS portable power box will distribute electrical power within a system or facility. They’re common in industrial settings, including data centers and communication infrastructure.

Each Residential Contractor Kit is a power solution that adds 48 amps at 120 volts. The Power Boxes are designed to offer enhanced electrical protection with numerous choices for power options.

The kit comes with a power box, new and old-style range adapters, new and old-style dryer adapters, and a 25-ft. extension cord rated at 30 amps. Also included is a GMS trolley bag.

It has 30A/220V input and 48A/110V output amps, a twist lock power cord, and comes in at 32 lbs. Each unit comes with a 3-year warranty. Each portable power box is made in Fort Wayne, Ind. Yellow, blue, red, and green options are available, each retailing for $999. It’s also possible to purchase just the GMS G-Unit for $399.

Contact: FARM SHOW Followup, GMS Power Distro (ph 260-312-2736; [email protected]; www.gmsdist.com).

From the archive · Full text
Feature story

Custom Aluminum Dashboards

Featured source: Landon Balk and Rebecca Balk

LRB Speed specializes in creating aftermarket aluminum dashboards tailored for a variety of brands, including Hyundai, Honda, Chevrolet, Lexus, Volkswagen, Mazda, Dodge, Ford, and Nissan.

Landon and Rebecca Balk started the company in 2015 in Clearwater, Calif. They manufacture each dashboard from 5052 aluminum sheets cut on a Mazak Fiber Laser, resulting in robust and lightweight designs made with ultra-precise cuts. The dashboards are then processed by a Timesavers sander for a smooth, brushed finish and shipped out with stainless steel and zinc mounting hardware.

One popular product is a customized aluminum dashboard for the ’94 to ’97 Dodge Ram. It’s designed to work with stock door panels or LRB Speed’s aluminum door panels. Aftermarket door panels might interfere with LRB’s dashboard design. Designed to replace stock plastic dashboards, the piece weighs approximately 18 lbs. Customers can request custom setups based on the gauges or digital dashboards they want displayed, so long as they fit within 14.5 in. by 4.75 in. Defroster vents are standardized for all dashboard configurations.

It’s shipped out unassembled and ready to be painted, powder-coated, wrapped, or left raw. The dashboard exclusively uses factory mounting locations to ensure you don’t need to perform any drilling, cutting, or other modifications to the vehicle itself during installation. Rivets are included, and all holes are precut for straightforward assembly. Expect this to take between 3 to 4 hrs., which includes the removal and disassembly of the stock dash. Once installed, the entire dashboard is sturdy and rigid without rattles. The top cap, positioned over the gauge hood, can be removed for easy access to the wiring underneath.

All LRB Speed dashboards are made to order in-house, with an average 15 business day build time. Pricing starts at around $1,250, not including shipping. Because of the customized nature of each dashboard, they’re not eligible for return. Powder-coating will add approximately 2 weeks to the standard build time. Contact LRB Speed directly for more information for more information on quotes and custom projects.

Contact: FARM SHOW Followup, LRB Speed ([email protected]; www.lrbspeed.com).

From the archive · Full text
Feature story

Cart Helps With Tire Changes

Featured source: Kevin Robinson

The TRAC (Tire Rotation Assistance Cart) minimizes the risk of injury and makes rotations and installations easier.

“It’s a simple way to use leverage to remove and install a tire from a vehicle during service or rotations,” says Kevin Robinson, owner of TRAC LLC.

“Simply slide the tool under the tire to lift without sitting on the ground, straining your back, arms, and legs. The Roller Accessory Plate allows the technician to rotate the wheel to align the holes of the wheel with the hub of the vehicle, making for an easy installation. It really doesn’t get any easier.”

The cart aids in transporting tires and placing them directly where you need them to install the tire securely. With TRAC, there’s no heavy lifting required.

“The patented TRAC TireJack works well in almost every shop environment,” says Robinson.

TRAC is built for durability with heavy-duty welded steel construction. The included steel base rollers provide tire support and make it easy to roll where needed. There’s a quick-lift hydraulic pump to get the cart to the precise height necessary for tire support. The swivel stem casters are lockable, and the telescoping support bar keeps the tires in place. There’s also an easy-access lug nut holder.

The cart weighs 83 lbs. and measures 23 in. by 21 in. by 18 to 44 in., depending on extension. The TRAC retails on the company website for $1,200. When in stock, the carts ship out within 5 to 10 business days. It’s also possible to purchase just the tire cradle and post ($400) or a floor jack adapter ($150) to use with your own floor jack.

It’s possible to order carts with custom paint colors by contacting TRAC. All purchases come with a 30-day return policy and a limited warranty. If they fail for any reason during the first year of ownership, the company will replace them for free.

Contact: FARM SHOW Followup, Kevin Robinson, TRAC Tire Rotation Services (ph 720-231-1839; [email protected]; www.liftwithtrac.com).

From the archive · Full text
Feature story

Big Wheel Jack Offers Extra Lift

Featured source: CAT Premium Products

Farmers, rural residents, and off-road operators will likely find the CAT Big Wheel Off Road Jack handy to have around. It’s designed for use on sand, gravel, and other soft surfaces. The large wheels make it easy to maneuver into position with the jack handle, and the bottom skid plate keeps the jack level and stable. The jack has a lift capacity of 3 tons. It has an on-board stored extension for the lift post. The extension can be adjusted to provide up to 7 3/4 in. additional lift by pinning it at different levels on the post. The extension gives the jack a maximum lift of up to 29 1/4 in. The hybrid steel/aluminum construction weighs 89 1/2 lbs. It has a 13 1/4 by 31 in. footprint and a 10 in. height, not including the handle. The CAT Big Wheel Off Road Jack is available from CAT Premium Products at $499.99. The same jack can be ordered through Northern Tool for $389. The jack is made by Alltrade Tools. Its products are sold under company-owned brands and licensed brands such as CAT, Ingersoll Rand, and others. Contact: FARM SHOW Followup, CAT Premium Products (ph 888-554-7305; [email protected]; www.catpremiumproducts.com) or Northern Tool & Equipment (ph 800-221-0516; www.northerntool.com).

From the archive · Full text
Feature story

Adjustable Wrench Converted To Spanner

Featured source: Dave Garber, Butte, Mont.

When Dave Garber needed a spanner wrench to pull the clutch off a chainsaw he was rebuilding, he visited all his normal hardware stores and even the pawn shops but was unable to find one to do the job.

He considered drilling holes in a piece of metal to fit his current task but came up with a better idea.

“After striking out trying to buy one, I thought I might be able to modify one of my adjustable (crescent) wrenches and use it together with some standard metal punches,” says Garber.

He took one of his stainless-steel adjustable wrenches and drilled a hole to slide a 3/16-in. punch through each jaw.

“This makes it more of a one-size-fits-all tool for more jobs that might come up with slightly different sizes,” he says.

“I wasn’t sure how they’d drill out, but the stainless steel was buttery soft.”

He says the only limitation to the improvised tool is the size of the adjustable wrench and the extent to which the jaws open, but the same process could be used with larger wrenches as well.

“If you don’t feel like spending 60 bucks on a regular spanner wrench or you can’t find one, you can do something like this for a lot cheaper. It works really well. I’m sure I’ll get more use from it in the future.”

Contact: FARM SHOW Followup, Dave Garber, 2740 Locust St., Butte, Mont. 59701 (ph 937-621-8005; [email protected]).

From the archive · Full text
Feature story

Sturdy No-Tip Shop Chairs

Featured source: Chris Rusch, Green Bay, Wis.

Chris Rusch originally owned a metal shaping company, and much of his time was spent working in garages while sitting on cheap, uncomfortable stools. He started experiencing knee and back pain and knew there had to be a better design. The family made a list of all the pain points of those chairs and put their engineering skills to work designing a superior alternative, the first Vyper chair.

Today, Vyper sells six chair styles made in Green Bay, Wis., from high-quality materials. All seats measure 14 in. in diameter and 4 in. in thickness. Most models are height adjustable from 15 in. to 32 in., depending on the model. You can also swap out the legs in a Vyper chair to better accommodate your workstation.

Chairs vary in price, from the Low-Pro ($425) backless shop stool with a dual-sided tool tray to the Elevated Steel Max ($625), a seat for higher workstations.

The Robust Steel Max ($595) remains their most popular option. It’s designed to reduce back pain and allows for freedom of leg movement. This increases blood flow and lowers the risk of knee pain. The chair can be fitted with the Vyper swivel attachment that utilizes an Acme rod height adjustment, allowing you to twist to go up or down. The chairs feature 4-in. industrial-grade wheels, and the durable foam seat provides comfort for extended sitting. A stainless-steel foot rail helps with stability and encourages better posture. The yellow zinc-plated hardware is corrosion-proof for durability. It’s height adjustable from 15 in. to 24 in. and has a 400 lb. weight capacity.

Contact: FARM SHOW Followup, Vyper (ph 920-301-3822; www.vyperindustrial.com).

From the archive · Full text
Feature story

Wash-Bots Save Shop Space

Featured source: Bitimec Wash-Bots, Inc.

Bitmec Wash-Bots are designed specifically for washing large vehicles. They range from “fixed-bay” electric devices for tackling small SUVs to portable battery or diesel-powered machines that can handle less standard-sized equipment. These cost-effective machines save time, manpower, and space.

The Bitimec Wash-Bots 626 Tank-EZ is a tank wash for odd-shaped vehicles, including tank trucks, liquid tankers, cornhusker semi-trailers, and grain hoppers. Wash Bots designed this machine to make cleaning projects easier and faster, using less water, detergent, time, and manpower than standard methods.

The tank wash weighs approximately 1.5 tons when the 132-gal. water tank is full. The Wash-Bot’s self-traction and direct-link steering make it easy to maneuver. It has exclusive twin full-function controls for completing a full cycle wash while keeping the operators dry.

The 24V battery-powered washer has large diameter (5 ft. 3 in.) brush heads that can clean around contours. Thanks to a brush-only inclination system, the brush can reach above the largest tankers.

Bitimec Wash-Bots 626 Tank-EZ is a mobile truck wash that is available with diesel or battery power. The washer will carry its own water and optional detergent. It comes with two controls and spins the brush in two directions for an extra efficient clean. Soap and rinse water are optional and can be accessed through a button as an operator guides the machine around the vehicle to wash. The large brushes make up for the muscle power of a six-person crew. Two laps around the vehicle can make it 80 percent clean in 8 to 10 min.

Pricing varies by unit and freight costs, but the Tank 626 EZ starts at about $45,000. Contact the company directly for a comprehensive overview of the other models and features.

Contact: FARM SHOW Followup, Bitimec Wash-Bots, Inc., 15 East Putnam Ave., Greenwich, Conn. 06830 (ph 203-340-9388; [email protected]; www.wash-bots.com).

From the archive · Full text
Feature story

Hurricane Cleaner Gets Under Vehicles

Featured source: Mosmatic Corporation

The Mosmatic Hurricane Undercarriage Cleaner makes it easy to powerwash vehicle underbodies without a car lift. It’s a time-saving and cost-efficient cleaning option used with cold or hot pressure pumps and designed for use on cars, trucks, agriculture machines, construction equipment, and transportation vehicles.

Mosmatic Corporation is part of the Mosmatic AG group based in Switzerland. A new production facility has allowed the company to introduce its innovative products to the American market.

The Hurricane undercarriage cleaner comes in various heights and includes models with diameters of 21 in. or 30 in. Mosmatic Hurricane’s components, including castors, are made from polished stainless steel (INOX).

Each Hurricane model has a high rpm stainless-steel swivel featuring reinforced, self-lubricated ball bearings. Thanks to a dual spring-based carbide seal system, the pressure washer can handle tough conditions without breaking down.

A powered rotor arm is precision welded and balanced to withstand up to 4,000 psi. The high-pressure pistol has an ergonomic relax-action function to promote ease of use and prevent fatigue if your hand comes off the trigger. A protection plate serves as a debris shield for the rotor arm and nozzles.

The pressure washer comes with either stability or HP nozzles, depending on the model. Stabilizer nozzles within it let you increase the distance and impact of the spray. They come with a higher outer ring, which shields the nozzles from damage. HP nozzles direct water for a more vigorous cleaning force.

The surface cleaner is shipped out almost fully assembled. All that’s needed upon delivery is to complete the fork with the housing, high-pressure pistol, and hose, following the included instructions. It’ll be ready to use immediately. Pricing will vary by model and retailer but starts at around $1,378. A Hurricane Pro model lets you pivot the spray deck to allow for multiple cleaning angles. These adjustable angles allow for “all-around” cleaning for a time-saving, cost-efficient tool. Pricing starts around $2,188. Shipping costs are calculated by freight weight (not included in the listed price). Call for an up-to-date quote.

Contact: FARM SHOW Followup, Mosmatic Corporation, 8313-196th Ave., P.O. Box 400, Bristol, Wis. 53104 (ph 800-788-9880; [email protected]; www.powerwashstore.com).