Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 48, No. 2 (2024)

Joe Kansak

Joe Kansak, Ocean View, Del.

“I have a 10,000-sq. ft. shop, and it seemed like we were always leaving stuff on. I would come in and discover a heater, air compressor, or lights hadn’t been shut off. Left on for a day or two, the electricity used adds up.

“I solved the problem with a shop monitoring plate. I drilled six small holes in a blank outlet plate and inserted LED lights in them. I ran wires from one of the legs of each light to the neutral bar on the shop’s electrical panel.

“I ran a 16-gauge insulated wire from the other leg of each LED to the non-energized side of the switches I wanted to monitor and labeled the LEDs for air, heater, exhaust, attic light, back lights, and outside lights.

“If an LED light is on, it reminds me to shut off that switch before I leave the shop. It worked so well that I’ve added another set of LEDs on a second plate for additional switches I want to monitor.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.