Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 48, No. 3 (2024)

Toby Haiste

Individual tip 1 of 2 from this reader’s published contribution.
Toby Haiste, Prince George, B.C.

“I needed to replace the upper hay roller bearings on a John Deere round baler without an overhead hoist. I fashioned an 8-ft. long square tube with a round bar to fit in the floor jack. It has a fork on the other end to cradle the roller. With a buddy’s help, I removed the roller to replace the bearings on the bench. You can save a lot of money by getting the bearing from a jobber, not Deere.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.