Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 48, No. 3 (2024)

Larry Harrington

Larry Harrington, L & K Machine LLC, Western, Neb.

“The engine in a Cushman golf cart needed to be replaced. It was more economical to get a new engine than repair the old one. The new engine didn’t have a tapered crankshaft, and a crankshaft from a generator wasn’t the same taper. I bought an import engine and tapered the crankshaft to fit the Cushman pulley. I didn’t take the engine apart to taper the crankshaft. Instead, I took off the shroud and plug and put the whole engine into the lathe and machined the taper on the crankshaft.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.