Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 48, No. 5 (2024)

Lenus Yeo

Lenus Yeo, Clinton, Ontario
Lenus Yeo
Photo: FARM SHOW · Vol. 48, No. 5 (2024) · p. 32

“I had to replace bearings on the header drive shaft on my swather. The bolts holding the flangette went through one side of a partition. The other side was only accessible by crawling under the swather to the other side. My cats were watching me but didn’t offer to help, so I came up with the idea of supporting the bolts and flangettes with magnets in place and was able to put the lock washers and nuts on the other side.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.