Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 48, No. 5 (2024)

Steve Crouse

Steve Crouse, Patten, Maine

“Welding two identical profiles together, such as two pieces of 2-in. round pipe, is easy to line up if you have a 2 by 2 or 3 by 3 angle iron welded V down on the edge of your welding table attached at the upper level so that the angle iron is flush with the tabletop.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.