Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 50, No. 3 (2026)

Roger Gutschmidt

Roger Gutschmidt, Gackle, N.D.
Roger Gutschmidt
Photo: FARM SHOW · Vol. 50, No. 3 (2026) · p. 33

“I’ve been making quick-attach units for 3-pt. hitches for close to 40 years, and I always add a hitch ball to the top of the unit. It’s proven handy for my customers and me when moving hay-bale trailers and other ball-hitch equipment around the farm.

“I position it just to the side of the top link clevis.

“The stress on a ball hitch like this can be significant when pulling loads across rough ground. I use 1/2-in. wall pipe and weld it to the top of the quick-attach frame. I slip a heavy-duty nut into the pipe and weld it in place, to later screw in the ball.

“I like to strengthen the ball hitch by welding a short length of 1/2-in. steel between it and the top link clevis. I also add flanges to the other sides of the pipe.

“It’s a simple add-on, but well worth the time. Done right, it’ll last a lifetime.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.