Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW

Repairs & Maintenance

2077 shop tips and stories · page 6 of 35, newest issues first.

From the archive · Full text
Reader shop tip 1 of 2

William “Bubba” Sanford

Individual tip 1 of 2 from this reader’s published contribution.
William “Bubba” Sanford, Roxboro, S.C.

“My tip for better machine maintenance is to constantly walk around equipment looking for minor problems to fix before they become major. I try to keep equipment as clean as possible to make problems easier to spot. Maintenance,…

Read the complete tip →
From the archive · Full text
Reader shop tip 3 of 3

Gerald Lenkaitis

Individual tip 3 of 3 from this reader’s published contribution.
Gerald Lenkaitis, Granville, Ill.

“I rigged up the wiring in my shop so when we turn off the lights, the air compressor shuts off. That way I know if I blow a hose, the compressor won’t burn up because I know I’ll…

Read the complete tip →
From the archive · Full text
Reader shop tip 1 of 2

Bruce Porkka

Individual tip 1 of 2 from this reader’s published contribution.
Bruce Porkka, Atlantic Mine, Mich.

“After installing steel steps in our shop pit, it was kind of precarious climbing up. So, I welded a pipe coupler to the top and bottom steps and inserted removable handles.

Read the complete tip →
From the archive · Full text
Reader shop tip 2 of 2

Bruce Porkka

Individual tip 2 of 2 from this reader’s published contribution.
Bruce Porkka, Atlantic Mine, Mich.

“Getting up into our Valmet 644 Forwarder logging tractor was difficult. I built a 4-step ladder that pivots at the top and then installed a cheap remote-controlled winch to raise and lower it.”

Read the complete tip →
From the archive · Full text
Reader shop tip 1 of 2

Jerome Jirak

Individual tip 1 of 2 from this reader’s published contribution.
Jerome Jirak, Waucoma, Iowa

“I bought a used bridge crane for a new shop I put up. I farm by myself, and it’s like having a second set of hands that can hold anything. It’s 60 ft. across and runs 80 ft.…

Read the complete tip →
From the archive · Full text
Reader shop tip 2 of 2

Jerome Jirak

Individual tip 2 of 2 from this reader’s published contribution.
Jerome Jirak, Waucoma, Iowa

“I bought a plasma cutter, and there’s nothing wrong with the cutter, but on the farm, you’re often working with old and rusted metal. Plasma cutters just don’t work very well on dirty metal. For example, if you…

Read the complete tip →
From the archive · Full text
Reader shop tip 1 of 2

Jim Wise

Individual tip 1 of 2 from this reader’s published contribution.
Jim Wise, Clyde, N.Y.

“Getting kingpins out of the steering knuckle on 4-WD tractors is tough. I use an air chisel and RX-454 penetrating oil. After lots of pounding, I can get it done.

Read the complete tip →
From the archive · Full text
Reader shop tip 2 of 2

Jim Wise

Individual tip 2 of 2 from this reader’s published contribution.
Jim Wise, Clyde, N.Y.

“My routine maintenance suggestion is to take time to change oil on equipment with chains and rollers at the end of the day when the machine is still warm. It helps get oil into the rollers, providing more…

Read the complete tip →
From the archive · Full text
Reader shop tip

Mitch Fenske

Mitch Fenske, Mindoro, Wis.

“When buying bearings, I’ve found it pays off to contact an actual bearing distributor. BDI Express in La Crosse, Wis. (www.bdiexpress.com; ph 608-782-6747) has saved me thousands of dollars over the years, both personally and at my job.…

Read the complete tip →
From the archive · Full text
Reader shop tip 2 of 2

Cal Miner

Individual tip 2 of 2 from this reader’s published contribution.
Cal Miner, Wilmar, Minn.

“When you’ve got a tight spot for putting on a nut, just sharpen a pencil eraser and slip the nut on over the end. It’s like having an 11th finger.”

Read the complete tip →
From the archive · Full text
Reader shop tip 1 of 2

John Rochester

Individual tip 1 of 2 from this reader’s published contribution.
John Rochester, Deerfield, Fla.

“My toolbox was so overloaded that when I opened a drawer, it would start falling over. I solved the problem by hanging an old tractor weight low on the back as a counterweight. Problem solved.

Read the complete tip →
From the archive · Full text
Reader shop tip

Ken Skow

Ken Skow, Lewiston, Mich.

“Here’s a handy way I’ve found to make sanding easier. I glue sandpaper to paint sticks, round dowels, or other shaped wood (as needed to fit whatever you’re sanding) using contact cement or aerosol upholstery adhesive. Sometimes I’ll…

Read the complete tip →