Photo: FARM SHOWFrom the archive · Full text
Feature story
Featured source: Brian Laine, Arlington, Wash.
Testing an engine before he installed it seemed like a good idea to Brian Laine, so he built an engine run-in stand. He can bolt a motor in place, fire it up, and run it for break-in, tuning…
Read the complete story →
Photo: FARM SHOWFrom the archive · Full text
Feature story
Featured source: Dale McLaen, Rutland, N.D.
Dale McLaen’s trailer tips can add years to tire life, improve suspension systems and keep brake light and turn signal cables clean, dry and intact. Until he retired, McLaen ran an equipment repair business on his farm.
Read the complete story →
Photo: FARM SHOWFrom the archive · Full text
Feature story
Featured source: Christophe Goffoz, Saint-Roch-de-l’Achigan, Quebec, Canada
“When you think about it, what people do most with their trailers is store them,” says Christophe Goffoz, owner and co-founder of Apogee Trailers.
Read the complete story →
Photo: FARM SHOWFrom the archive · Full text
Feature story
Featured source: Arden and Salley Vernon, Turon, Kan.
Arden and Salley Vernon of Turon, Kan., have an easy fix to keep your trailer safe.
Read the complete story →From the archive · Full text
Reader shop tip
Tony Kramer, Converse, Texas
“The plastic radiator reservoir on our 2002 Dodge 2500 truck cracked on the bottom. Instead of buying an expensive replacement, I put four coats of clear Flex Seal over the cracked area. Months later the repair is still…
Read the complete tip →
Photo: FARM SHOWFrom the archive · Full text
Feature story
Featured source: C-Bond nanoShield, Houston, Texas
For vehicle operators hoping to save their windshields from cracks and chips, C-Bond’s nanoShield might be the answer.
Read the complete story →From the archive · Full text
Reader shop tip
Gerald Ripps, San Antonio, Texas
“Some trucks have a winch under the bed to let down the spare. It can be clumsy and awkward to do. I cobbled together a pipe with a lug nut on the end that fits over the winch…
Read the complete tip →From the archive · Full text
Reader shop tip
John Rochester, Deerfield, Fla.
“It’s hard to hold a funnel in place when refueling my flatbed pickup. A C-clamp works great to hold the funnel steady against the sideboards. No more spills.”
Read the complete tip →From the archive · Full text
Feature story
Featured source: Jerald Schlabach, Sullivan, Ill.
The Quick Spotter from Norden Manufacturing is designed to mount on forklift forks to move trailers and wagons smoothly into place. The Quick Spotter slides on and self-locks to most 5,000-lb. and less forks. Drop the forks to…
Read the complete story →From the archive · Full text
Feature story
Featured source: Chris Nielsen, Farmington, Minn.
Chris Nielsen has invented several handy gadgets to make jobs simpler around his farm and repair shop, but none of them helps keep his shop clean as well as his used oil reservoir.
Read the complete story →From the archive · Full text
Feature story
Featured source: Harley Willett, Dallas, Texas
Harley Willett had a dull chainsaw with no outlet to power the sharpener, so the Texas man got creative.
Read the complete story →From the archive · Full text
Feature story
Featured source: Marshall R. Berkoski, Cantril, Iowa
It’s easy for Marshall Berkoski to get under the equipment he’s working on with the help of an old forklift mast and a big tree. When his old forklift was vandalized to the point of no repair, Berkoski…
Read the complete story →From the archive · Full text
Feature story
Featured source: Chadd Bond, Jones Creek, Texas
Chadd Bond has a 6 by 12-ft. worktable with a built-in table saw and routers. The custom builder designed it to work with 4 by 8-ft. sheets of plywood.
Read the complete story →From the archive · Full text
Feature story
Featured source: Aaron DeWard, Grand Rapids, Mich.
“The Tire Step helps you access places on trucks and other equipment that are hard to reach,” says Aaron DeWard of Unique Truck Equipment in Grand Rapids, Michigan.
Read the complete story →
Photo: FARM SHOWFrom the archive · Full text
Feature story
Featured source: Dakota Ag Innovations, Mitchell, S.D.
Instead of scrubbing or pressure washing dirty tractors, combines or other equipment, you can foam them using Dakota Ag’s foam, says Lynn Odland, President of Dakota Ag Innovations. Grime, grease and contaminants are cleaned off without harming electronics…
Read the complete story →From the archive · Full text
Feature story
Featured source: Kenneth Vandeventer, Ottawa, Kan.
Kenny Vandeventer’s skid steer flips its trailer ramps up or down as it drives on or off the trailer. The automation is strictly mechanical with no hydraulics, electronics or remotes involved.
Read the complete story →From the archive · Full text
Feature story
By Chad Smith
Featured source: Dan Nahlers, Gibbon, Minn.
Dan Nahlers, the owner of Dan’s Custom Welding Tables, LLC., in Gibbon, Minn., says he’s been making multi-hitch plates for several years.
Read the complete story →From the archive · Full text
Reader shop tip
LeRoy Momper, Fredonia, Wis.
“I’ve tried many kinds of moisture and corrosion-proof wire connections on my trailers and farm equipment, but they all failed, especially under harsh conditions. Soldering makes a good connection, but the flux corroded the connections over time. When…
Read the complete tip →From the archive · Full text
Feature story
Featured source: Gaither Tool Co., Jacksonville, Ill.
The Bead Bazooka seats tire beads with a high-pressure blast of air. Gaither Tool Co., maker of the Bead Bazooka, recently introduced a new and improved version. The new generation handheld blasters are half the size of the…
Read the complete story →From the archive · Full text
Feature story
Featured source: Tim Reisenauer, Kennewick, Wash.
Climbing onto a pickup bed doesn’t get easier with age unless you have a folding step like Tim Reisenauer. The step plate is attached to a standard receiver hitch crossbar, which in turn is bolted to the underframe…
Read the complete story →From the archive · Full text
Reader shop tip
Doug Johnson, Aberdeen, Wash.
“No matter what kind of trailer you’re using, if the license plate is mounted down low under the taillights, you’re eventually going to break the plastic bracket and/or the frame holding it in place. After 60 years of…
Read the complete tip →From the archive · Full text
Reader shop tip
Ken Goeldner, Delmar, N.Y.
“When I had a snowplow installed on my truck several years ago, I was advised to liberally apply dielectric grease to the electrical connections between the plow and vehicle. Since then, I have also followed that advice on…
Read the complete tip →From the archive · Full text
Feature story
Featured source: Dust Killer Tools, Mohnton, Penn.
Silica dust is no joke for crews cutting pavers, stone, concrete or most other hardscapes. Dust Killer Tools eliminate the problem, capturing dust as it’s being made.
Read the complete story →From the archive · Full text
Feature story
Featured source: Bern Smith, Madison, Fla.
Lifting the tailgate on his trailer has been much easier since Bern Smith added a couple of springs. Instead of purchasing expensive encased springs that cost $150 to $250, Smith bought two 1 1/2 by 13-in. extension springs…
Read the complete story →
Photo: FARM SHOWFrom the archive · Full text
Reader shop tip
Jeff Binion, Newnan, GA
“I put a 2-in. pvc pipe cap on my truck’s trailer ball. The rear camera picks up the cap much better when backing up. Just ream it out a little with a Dremel tool for a snug fit.…
Read the complete tip →From the archive · Full text
Feature story
Featured source: Scott Karkau, Mason, Mich.
“I built a large storage shed using pallet racks for the framework after seeing a much smaller shed built the same way at a local hardware store,” says Michigan idea man Scott Karkau.
Read the complete story →From the archive · Full text
Feature story
Featured source: Stephen Garver, Marion, Ark.
When Stephen Garver began considering installing a shop crane, he decided he could adapt a knuckle boom crane that would normally be mounted on a truck.
Read the complete story →From the archive · Full text
Feature story
Featured source: Troy Hall, Lucas, Iowa
Troy Hall says his father Ken’s Deere XUV835 Gator is a great utility vehicle that does all sorts of work, but until recently it had one big drawback.
Read the complete story →From the archive · Full text
Feature story
Featured source: Anthony Spiering, Powell, Wyo.
Anthony Spiering takes his welding table where it’s needed. He no longer carries the work to the table. The mounted shop hoist makes handling heavy projects even easier.
Read the complete story →From the archive · Full text
Feature story
Featured source: Dale McLaen, Rutland, N. Dak.
Dale McLaen has three ideas that make shop work easier.
Read the complete story →From the archive · Full text
Reader shop tip
Isaac Rankin, Swoope, Va.
“My truck was leaking oil out of a small crack in the oil pan. I would’ve had to drop the axle or pull the engine except for a stick of Blue Magic QuikSteel epoxy. I got the pan…
Read the complete tip →From the archive · Full text
Feature story
Featured source: Michael and Connie Kenner, Oceanside, Calif.
Michael and Connie Kenner got tired of getting stuck in soft ground with their hand truck. They turned the 2-wheeler into a 6-wheeler, and now it goes just about anywhere.
Read the complete story →From the archive · Full text
Feature story
Featured source: Tony Bunniss, Webster, Minn.
FARM SHOW contributor Tony Bunniss built a lift table from a 5,000 lb. truck lift modified with extra scrap steel from his shop.
Read the complete story →From the archive · Full text
Feature story
Featured source: Boyd Brue, Rochester, Minn.
Boyd Brue hangs extra light exactly where he needs it in his pole shed. A 10-ft. long, 1 by 3-in. board with a wooden hook at one end and a trouble light fixture on the other is easy…
Read the complete story →From the archive · Full text
Feature story
Featured source: LiQuiTube, Carterville, Ill.
Preventing leaks may be the main reason that farmers and truckers fill their tires with LiQuiTube, but the tire sealant does much more, says Dennis Belanger, sales manager for the Carterville, Ill., company. Made with antifreeze and a…
Read the complete story →From the archive · Full text
Feature story
Featured source: Craig Nelson, Clark Fork, Idaho
When Craig Nelson’s dealer installed a snowplow on his F150 Ford, the control switches were installed on the floor. Using mostly salvaged parts, he soon had them within easy reach.
Read the complete story →From the archive · Full text
Feature story
Featured source: Mark Yax, Solon, Ohio
When Mark Yax needed to replace some rotten wood on his barn this past autumn, he decided to modify his 1,000-lb. rated Harbor Freight motorcycle lift into a man lift scaffold to complete the work.
Read the complete story →From the archive · Full text
Reader shop tip
Rick Bohl, Cedaredge, Colo.
“We had a problem in our carport with chalky drip lines off the underside of the metal roof, which is starting to deteriorate. When condensation collects on the metal, it drips from the raised ribs and leaves nasty…
Read the complete tip →From the archive · Full text
Feature story
Featured source: Eric Grutzmacher, Sisters, Ore.
Eric Grutzmacher keeps a chain and short piece of pipe in his pickup. It’s come in handy often to move a fallen tree across the road or rip out invasive shrubs on his Sisters, Ore., property.
Read the complete story →From the archive · Full text
Feature story
Featured source: Tech-Bond Solutions, Newark, Ohio
Tech-Bond Solutions sells a polymer patch that works on pvc, galvanized, and copper pipes, and any kind of water tank except for stainless. Designed to quickly seal up cracks or holes, the patent-pending patch is made with flourosilicone…
Read the complete story →From the archive · Full text
Feature story
Featured source: Kenny Vandeventer, Ottawa, KS
“Recently I borrowed my grandson’s mower trailer and while I had it I decided to repair the fold-down ramp. The problem was that after I finished the repairs it was so heavy I could hardly lift it,” says…
Read the complete story →From the archive · Full text
Feature story
Featured source: Tie Boss, LLC, Piqua, Ohio
U.S.-made. Easy to use. Lifetime warranty. Those are things customers appreciate about the Tie Boss. It’s a handy tool for tying down or hoisting up loads.
Read the complete story →From the archive · Full text
Reader shop tip
Daniel J. Moore, Bellingham, Wash.
“I put a 1 7/8-in. ball hitch on one side of my tractor loader bucket and a 2-in. ball on the other side. Makes it easy to move trailers around the yard.”
Read the complete tip →From the archive · Full text
Reader shop tip 1 of 3
Individual tip 1 of 3 from this reader’s published contribution.
Jim Ellinger, Hanna, Ind.
“To make it easy to change tires around the farm, I mounted a small Harbor Freight tire changer to the receiver hitch on my pickup.
Read the complete tip →From the archive · Full text
Reader shop tip 2 of 3
Individual tip 2 of 3 from this reader’s published contribution.
Jim Ellinger, Hanna, Ind.
“To make rubber cutting edges on snowplows or other equipment, and to line pickup beds, go to Tractor Supply Co. and spend $40 on a 4 by 6-ft. horse stall mat. You’ll save hundreds of dollars.
Read the complete tip →From the archive · Full text
Reader shop tip
Clifton Lamar Martin, Port Trevorton, Penn.
“I built a stand off one corner of my workbench to hold a truck tool box so I can have tools handy without cluttering up my workbench.”
Read the complete tip →
Photo: FARM SHOWFrom the archive · Full text
Reader shop tip 1 of 2
Individual tip 1 of 2 from this reader’s published contribution.
Gary Swensen, Yankton, S.Dak.
“I’ve been changing my oil in my vehicles for decades. For most of the time I’ve used front wheel ramps and a creeper, but the creeper gets caught in the cracks of the concrete, extension cords get under…
Read the complete tip →
Photo: FARM SHOWFrom the archive · Full text
Reader shop tip 2 of 2
Individual tip 2 of 2 from this reader’s published contribution.
Gary Swensen, Yankton, S.Dak.
“With 4 boys and their vehicles along with my pickups and my wife’s vehicle, sometimes it gets difficult to remember how many quarts of oil go into each vehicle. I use a black magic marker to write the…
Read the complete tip →From the archive · Full text
Reader shop tip
Tom Dufrense, Grant, Minn.
“On a recent trip to Montana in our diesel-powered RV, the engine suddenly seemed to lose power and run sluggishly. While going up a hill our speed would drop from 70 mph to 30 or so with little…
Read the complete tip →From the archive · Full text
Feature story
Featured source: Art Martinez
It’s only logical that Art Martinez would build a high-performing engine for his own enjoyment since he’s part owner/operator of PSP Diesel, a performance diesel business in Houston. His business partner Richard Alvarado says Art’s 6.0L Powerstroke has…
Read the complete story →From the archive · Full text
Feature story
Featured source: Doug Andersen
For Utah-based truck driver Doug Andersen, watching TV’s Shark Tank combined with his wife’s good-natured prodding was the inspiration he needed to come up with his “wheel in a wheel”, a new twist on steering wheel spinners.
Read the complete story →From the archive · Full text
Reader shop tip 3 of 3
Individual tip 3 of 3 from this reader’s published contribution.
John Rochester, Deerfield Beach, Fla.
“When tightening wheel studs on truck or car tires, you can use a pry bar to hold the wheel in place. Just insert it across the wheel between the studs and rest the end on the ground.”
Read the complete tip →
Photo: FARM SHOWFrom the archive · Full text
Feature story
Featured source: Steve Schultz
A Norwegian company says it has developed a product that pulls water out of diesel fuel storage tanks. Developed for big diesel tanks at fuel stations, Aquafighter® is now available for agriculture, trucking, generators, and other uses.
Read the complete story →From the archive · Full text
Reader shop tip
Tom Dufrense, Grant, Minn.
“The drawbar on my Ford utility tractor spins freely in the hitch pins and was a constant annoyance when hooking up trailers or other equipment. So I came up with a pair of ‘stops’ to hold it in…
Read the complete tip →
Photo: FARM SHOWFrom the archive · Full text
Feature story
By By Jim Ruen, Contributing Editor
Featured source: Cojali USA
“We offer diagnostic solutions for commercial vehicles, agricultural vehicles, off-highway (construction) equipment, and marine equipment,” says Isidro Flores, Cojali USA.
Read the complete story →