Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW

Welding & Fabrication

2159 shop tips and stories · page 33 of 36, newest issues first.

From the archive · Full text
Reader shop tip 1 of 2

John Sparrow

Individual tip 1 of 2 from this reader’s published contribution.
John Sparrow, Barrie, Ontario

John made a tool for repairing and cleaning threads on bolts in small, hard-to-get-at places such as manifolds. It consists of a 3-in. length of 1 in. dia. pipe with a 3/4-in. hex nut or shaft welded to…

Read the complete tip →
From the archive · Full text
Reader shop tip 2 of 3

Joel Waldner

Individual tip 2 of 3 from this reader’s published contribution.
Joel Waldner, Lethbridge, Alberta

“A 5 by 12-ft. steel table on caster wheels works great for welding jobs and saves on one’s back. We used 2-in. sq. tubing to make the frame and welded a sheet of 3/16-in. thick steel on top.

Read the complete tip →
From the archive · Full text
Reader shop tip 1 of 2

Sandy Jackson

Individual tip 1 of 2 from this reader’s published contribution.
Sandy Jackson, Etowah, Tenn.

“I had a problem with my New Idea 456 round baler breaking bearings and shafts on the main roller at the bottom. The problem was that the 1 to 1 1/2-in. shaft on the right side (from rear)…

Read the complete tip →
From the archive · Full text
Reader shop tip 2 of 2

Sandy Jackson

Individual tip 2 of 2 from this reader’s published contribution.
Sandy Jackson, Etowah, Tenn.

“I also found out that the belts on the newer 486 balers are the same length as on the older models. I wasn’t satisfied with the narrow belts on my old model so I ordered some 11-in. wide…

Read the complete tip →
From the archive · Full text
Reader shop tip 2 of 2

Karl Plesums

Individual tip 2 of 2 from this reader’s published contribution.
Karl Plesums, Spooner, Wis.

“Three years ago, on the coldest day of winter, I also came up with an easy way to unplug Big Jim silo unloader chutes. Dad had accidentally plugged the hole down to the bottom conveyor with a frozen…

Read the complete tip →
From the archive · Full text
Reader shop tip 2 of 2

Universal Sales

Individual tip 2 of 2 from this reader’s published contribution.
Universal Sales, Box 55, McLeod, N. Dak. 58057 ph 701 439-2766

“We also sell tap and die sets - one with standard size taps and dies and the other with Metric. They’re made from Tungston tool steel alloy. Each set sells for $199 or you can buy them both…

Read the complete tip →
From the archive · Full text
Reader shop tip 2 of 3

Bill Reeks

Individual tip 2 of 3 from this reader’s published contribution.
Bill Reeks, Cromwell, Kent.

“Many people use plastic peanut butter jars to hold parts but some parts are too long. I solved the problem by cutting the center section out of one jar and splicing it to the center of another one,…

Read the complete tip →
From the archive · Full text
Reader shop tip 3 of 3

Bill Reeks

Individual tip 3 of 3 from this reader’s published contribution.
Bill Reeks, Cromwell, Kent.

“Another handy idea I had was cutting teeth into the sides and end of a square point shovel and then grinding them down sharp. Works great to remove weeds and grass. You can swing it from side to…

Read the complete tip →