Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW

Tools

5957 shop tips and stories · page 74 of 100, newest issues first.

From the archive · Full text
Reader shop tip

New Tech International

New Tech International, Box 26198, Fraser, Mich. 48026 ph 800 434-9192; fax 586 758-6549; email

[email protected]; website: www.newtintl.com): Their SealLube seal expander is said to stop any rubber oil seal leaks in engines, transmissions, power steering and hydraulic systems. Problems it can solve include oil leaks of all kinds, engine wear, cracked blocks,…

Read the complete tip →
From the archive · Full text
Reader shop tip 1 of 2

David I. Peters

Individual tip 1 of 2 from this reader’s published contribution.
David I. Peters, Morden, Manitoba

“I made a 40-in. extension for my shop crane that lets me lift 4 by 8-ft. sheets all the way up to my shop’s ceiling. The standard crane wasn’t able to lift the sheets more than 11 ft.…

Read the complete tip →
From the archive · Full text
Reader shop tip 2 of 2

David I. Peters

Individual tip 2 of 2 from this reader’s published contribution.
David I. Peters, Morden, Manitoba

“I also made an extension for my step ladder by adding wooden 2 by 2’s and 2 by 4’s to the bottom of the ladder and adding a step. It raised the stepladder about 18 in. and allowed…

Read the complete tip →
From the archive · Full text
Reader shop tip 1 of 2

Glen Teel

Individual tip 1 of 2 from this reader’s published contribution.
Glen Teel, Hays, Kan.

“I use anti-freeze to kill rats and mice. Just cut a small hole in the side of a plastic 2 liter pop bottle, about the right size for a mouse or rat to enter, and then put a…

Read the complete tip →
From the archive · Full text
Reader shop tip

Robert Kuehl

Robert Kuehl, Davenport, Iowa

“I save time by having special purpose tool boxes for electrical, plumbing, brakes, small engines, tires, wood working, etc. There’s some duplication of tools between boxes but it’s a lot easier than trying to pick all the necessary…

Read the complete tip →
From the archive · Full text
Reader shop tip 1 of 2

Karl Oysmueller

Individual tip 1 of 2 from this reader’s published contribution.
Karl Oysmueller, Pink Mountain, B.C.

“When installing pistons on air compressors or small engines, I would sometimes break the rings since I don’t have the special pliers needed to compress them. I’ve eliminated the problem by first wrapping the piston in a piece…

Read the complete tip →
From the archive · Full text
Reader shop tip 2 of 2

Karl Oysmueller

Individual tip 2 of 2 from this reader’s published contribution.
Karl Oysmueller, Pink Mountain, B.C.

“I have used the thin cardboard from coke boxes as gaskets on ATV engines. I used it where the cylinder pot gets bolted onto the motor housing. There have been no oil leaks or other prolbems since I…

Read the complete tip →
From the archive · Full text
Reader shop tip

Kerry Jahns

Kerry Jahns, Sand Lake, Mich.

“My Massey tractors sometimes need a boost to start. The starter is out in the open so rather than pull off the grill or hood, I connect the booster cable direct to the starter solenoid. Just be careful…

Read the complete tip →
From the archive · Full text
Reader shop tip

Calyx Manifold Dressing

Calyx Manifold Dressing, Box 53277, Cincinnati, Ohio 45253 (ph 800 313-5671 or 513 923-1154; fax 513 923-1154; www.calyxmanifold.com)

This company offers a paste-type dressing that lets you keep the exhaust manifold on any vehicle looking great at all times. You don’t have to remove the manifold to use it. The paste applies with a flannel cloth…

Read the complete tip →
From the archive · Full text
Reader shop tip 1 of 2

Gary Anderson

Individual tip 1 of 2 from this reader’s published contribution.
Gary Anderson, Bowden, Alberta

“After the ‘turtle disc’ on the rotary cutterbar on our Deere 935 discbine started showing wear, we simply exchanged a clockwise turning turtle with a counterclockwise turning unit, thus doubling their life expectancy.

Read the complete tip →
From the archive · Full text
Reader shop tip

Jesse Larson

Jesse Larson, 21880 431 Ave., DeSmet, S. Dak. 57231 (ph 605 854-3108)

Jesse’s a diesel technology student at Lake Area Technical Institute, Watertown, S. Dak. He and Steve Peters, a diesel instructor, came up with an inexpensive way to recharge 90-amp Nippondenso alternators commonly found on Deere tractors.

Read the complete tip →
From the archive · Full text
Reader shop tip

John McElroy

John McElroy, McElroy Enterprises, Inc., 411 First Ave. S., Ft. Dodge, Iowa 50501 (ph 800 397-3669)

“Your readers may be interested in our Kreem fuel tank liner. It’s an epoxy-type product that’s designed to prevent rust and corrosion and stop leaks in fuel tanks. It works great on old tractors and cars with tanks…

Read the complete tip →
From the archive · Full text
Reader shop tip 1 of 3

M. Hochstetler

Individual tip 1 of 3 from this reader’s published contribution.
M. Hochstetler, 174 Vogel Rd., Cumberland, Va. 23040 ph 804 492-4295

“I ran PVC air lines in my shop with several outlets. I hooked a portable air tank into the line with an automatic cut-off valve. I don’t lose pressure on the line when I unhook the tank. The…

Read the complete tip →